Mier Products - Metal Enclosures
NEMA Type 4 Temperature Controlled
Enclosures
These enclosures
are perfect for housing fire-panels installed on the outside of buildings, DVRs in remote locations, or wherever you wish to protect the equipment that
protects YOU!
If you have questions about the
NEMA or UL ratings, please give us a call at 1-800-473-0213. In
order to keep proper NEMA and UL ratings installers must keep the
AC/Heater unit upright at all times, and explicitly follow all
manufacturers' installation instructions, including using
water-tight fittings on any holes cut into the enclosure.
Mier’s
Temperature Controlled Enclosures are built of durable 16-gauge steel and
are covered with a protective outdoor, baked-on, powder-coat finish. These
metal boxes are designed to provide a degree of protection from rain, sleet,
snow, ice, dirt, and dust.
Enclosures ordered with an
air conditioner and heater (ACHT) come with
holes pre-punched on the left
side for easy and quick mounting of the ACHT unit. All of the enclosures come with studs for a
Tamper Switch in the top right.
There are no holes
(other than those
for the ACHT Unit) or knockouts in the enclosure. Exterior
mounting brackets, with two holes each, are on the top and bottom of the
enclosure. The
ACHT units ship on a separate skid from the enclosures and must ship
via LTL carrier.
Temperature controlled boxes
with
internal heat load of 200 watts:
- When Mier’s recommended 2000 BTU AC Unit with internal 500W
Heater is installed and functioning properly, the BW-124 or the
BW-136 will maintain a preset temperature (+/-3 degrees F).
This unit is capable of maintaining an 80° F internal temperature
(+/- 3 degrees F) up to an outside temperature of 135° F
- When Mier’s recommended 2000 BTU AC Unit with internal 500W
Heater is installed and functioning properly, the BW-124
maintains a preset temperature (+/-3 degrees F) up to a maximum of
60° F internal temperature down to outside temperatures of -20° F
- When Mier’s recommended 2000 BTU AC Unit with internal 500W
Heater is installed and functioning properly, the BW-136
maintains a preset temperature (+/-3 degrees F) up to a maximum of
60° F internal temperature down to outside temperatures of -10° F
If
your installation calls for cooler or warmer interior OR exterior
temperatures than those listed above, or if your internal heat load is
greater than 200 watts, call Mier Products for special order AC Units and
Heaters at 800-473-0213.
Model
Number |
Dimensions
W x H x D |
Color |
Features |
BW-124ACHT |
24” x 24” x 12” |
ANSI 61
Gray |
- 2000 BTU AC unit
- 500W Heater
- Variable Control
Thermostats
- Tamper Switch
- Interior water
channel & gasketing for added protection
- Removable 22”x22”
back panel
- Removable door
- Two 1/4 turn
latches pull door tight into the gasket
- Tubular-key lock
- Interior
literature tray with key tabs
|
|
BW-136ACHT |
24” x 36” x 12” |
ANSI 61
Gray |
- 2000 BTU AC unit
- 500W Heater
- Variable Control
Thermostats
- Tamper Switch
- Interior water
channel & gasketing for added protection
- Removable 22”x34”
back panel
- Removable door
- Two 1/4 turn
latches pull door tight into the gasket
- Tubular-key lock
- Interior
literature tray with key tabs
|
|
Temperature Controlled Boxes Accessories |
Model
Number |
Dimensions
W x H x D |
Color |
Features |
BW-AC2000 |
10" x 20" x 10" |
ANSI 61 Gray |
- 2000 BTU AC Unit
- 500 Watt Internal Heater
- Variable Control Thermostats
- 115V, 60 hz
- Includes a gasket that fits between the AC unit and the enclosure
- Draws 7 amps, which spikes to 17.5 amps at start-up
- weighs 63 lbs
- Mounts into pre-punched holes in the enclosure
- -4°/+131° F
- Air filter must be cleaned every six months
|
Included with the BW-124ACHT
and BW-136ACHT

The AC connections are inside the enclosure. |

The AC ventilation faces left of the enclosure. |
|
BW-TSW |
1" x 1" x 2" |
Brown |
- Plunger Style Tamper Switch
- Includes NC and NO contacts
- Weighs 1 ounce
- Mounts onto studs placed in the enclosure
|
Included with the enclosures listed above (BW-124ACHT
and BW-136ACHT). |
BW-124PO |
22" x 22" |
ANSI 61 Gray |
- Removable back panel mounts onto studs placed in the back of the enclosure
|
Included with the BW-124ACHT listed above. Also included with the BW-124BP (listed under outdoor enclosures). |
BW-136PO |
34" x 34" |
ANSI 61 Gray |
- Removable back panel mounts onto studs placed in the back of the enclosure
|
Included with the BW-136ACHT listed above. Also included with the BW-136BP (listed under outdoor enclosures). |
|